Shop
Showing all 20 results
-
High Solids Silicone Coating
Pro-Eco Sil Silicone Roof Coating
Pro-Eco Sil is a low VOC, high solids silicone roof coating designed to provide a seamless, waterproof membrane over top of your existing roof surface.Available in 55 gallon drums and 5 gallon buckets.
-
Standard Solids Silicone Coating
Pro-Poly Sil LS 2200 Series
Pro-Poly Sil Low Solids Silicone Coating is a moisture-curing, low solids silicone roof coating designed to be used as a coating over Sprayed Polyurethane Foam roofs.Available in 50 gallon drums and 5 gallon buckets.
-
Pro Patch Silicone Sealant
FG 400 Series Pro Patch Silicone Sealant
This is a thick, high-build silicone mastic designed to patch problem areas and flash in protrusions.Available in 1 and 2 gallon buckets.
-
Translucent Skylight Coating
Pro-Eco Lite HS 3220
Our clear Silicone Skylight Coating is a high-solids, low VOC, 100% silicone, translucent skylight coating designed to waterproof and protect skylights while still allowing natural light into the building.
Available in 5 gallon buckets
-
Metallic Silicone Roof Coatings
Call for PricePro-Eco Sil HS 3230 Series Premium Metallic Silicone Roof Coatings
HS 3230 Series Premium Metallic Silicone Roof Coatings are low VOC, high solids silicone roof coatings designed to provide the aesthetics of a metal panel roof while providing the exceptional performance of a silicone roof coating.
Available in 55 gallon drums, 5 gallon buckets, and 1 gallon buckets.
-
Pro-Level Surface Leveling Coating
Call for PricePro-Level SL 800 Surface Leveling Coating
Our Surface Leveling Coating is designed to be used on roofing projects in which the surface is too rough or uneven to apply a roof coating, such as gravel surface built-up roofs and “alligatored” areas of a smooth surface built-up roof.Available in 5 gallon buckets and 55 gallon drums.
-
Graco 933 Silicone Spray Equipment
Call for PriceThe best silicone spray equipment on the market. Capable of operating with 900′ of hose for your biggest jobs.
-
Pro-Grip Walkway Coating
PG 700 Pro-Grip Walkway Coating
Pro-Grip Walkway Coating is a one-component, moisture curing silicone rubber coating system designed to enhance the impact resistance of the roof surface. When paired with PG 750 Walkway Granules it can also provide a non-skid walking surface
PG 700 Pro-Grip Walkway Coating is available in 5 gallon buckets.
-
Pro-Grip Walkway Granules
Call for PricePG 750 Safety Yellow Walkway Granules
Pro-Grip Walkway Granules were designed to improve the impact resistance of the roof surface while also providing a non-skid walking surface. They should be embedded in PG 700 Walkway Coating.
PG 750 Safety Yellow Walkway Granules are available in 2 gallon pails weighing 25 lbs.
-
Silicone Caulk
SS 300 Series Professional Grade Silicone Sealant
Our 100% silicone caulk is a low VOC roofing caulk designed to make small repairs and prep joints, protrusions, and edges for roof coating application.Available in cases of 12 x 10.0 fl. oz. tubes.
-
Polyester Fabric
PF 200 Series Polyester Fabric
PF 200 Series is a stitch-bonded, polyester reinforcing fabric designed to strengthen joints and flashings. Designed to be used in conjunction with our 100% silicone roof coating.Available in 180′ rolls – 6″ or 12″ wide.
-
Butyl Fleece Tape
FT 500 Butyl Fleece Tape
Butyl Fleece Tape is a butyl rubber compound with an absorbent polyester fleece back. This product was developed to seal a variety of surfaces and prevent moisture intrusion.FT 500 Butyl Fleece Tape can be purchased individually. Each roll is 4” x 65.5’.
-
One-Way Moisture Relief Vent
Call for PriceMRV 600 One-Way Moisture Relief Vent
The One-Way Moisture Relief Roof Vent is engineered to prolong the life of your roof system by reducing both moisture within the roof system and trapped air pressure within the building.
MRV 600 One-Way Moisture Relief Vents can be purchased individually.
-
Test Kit
Call for PriceRoof Coating Adhesion Test Kit
TK 500 Roof Coating Adhesion Test Kit is a 4 oz. sample of our white, high solids silicone roof coating. This test kit is designed to test our product’s adhesion to metal, single-ply membranes, concrete, existing silicone, EPDM, and smooth surface built-up substrates.Available in 4 oz. cans with brush and test strips included.
-
SPF Primer/Night Seal
Call for PriceP-100
P-100 is intended to prime aged asphalt, SPF, metal, wood, and concrete surfaces while improving the adhesion and overall yield over sprayed polyurethane foam. It is a plasticizer-free, single-component, water-based, acrylic primer.Available in 55 gallon drums and 5 gallon buckets.
-
EPDM Bleed-Block Primer
Call for PriceP-110
P-110 is an acrylic primer designed to prime properly cleaned EPDM surfaces. It is a plasticizer-free, single-component, water-based, acrylic primer.Available in 55 gallon drums and 5 gallon buckets.
-
EPDM Rinseable Cleaner
P-120
P-120 is a high performance wash primer intended to improve adhesion over EPDM surfaces.Available in 55 gallon drums and 5 gallon buckets.
-
Rust Inhibitive Primer
P-130
P-130 is a high quality, water based, low VOC, rust inhibiting primer. P-130 is designed for application over metal roof surfaces to prime the surface and prevent rust growth. P-130 can be applied with spray, brush, or roller.
Available in 55 gallon drums and 5 gallon buckets.
-
Single-Ply Primer
P-151
P-151 is designed to improve the adhesion performance of silicone roof coatings over traditionally problematic single-ply substrates, such as TPO and PVC.
Available in 55 gallon drums and 5 gallon buckets
-
Bleed Block Primer
P-160
P-160 is an acrylic primer designed for application over smooth asphalt roof surfaces to enhance adhesion of silicone roof coatings.Available in 55 gallon drums and 5 gallon buckets.
